OPTIMedical OPTI CCA-TS, Operator'S Manual, Page: 85 / 271

4-14 Operator’s Manual – OPTI CCA-TS
4 CALIBRATION AND QUALITY CONTROL
4.5.4 Printing Control Reports
Your OPTI CCA-TS can print control measurement
reports and statistical information.
1. In the
<Ready> display, select
<Data Manager> .
2. Press <Controls> (Fig. 4-29).
3. In the
<Data - Control Measurement>
screen (Fig. 4-30), press the button to
display the Control results (Fig. 4-31). Use the
and buttons to display the
previous or next page of results.
4. To print individual results, highlight the desired
measurement (Fig. 4-30). To print groups
of results, highlight the first measurement
to be printed, press , then select
the last measurement to be printed. All the
measurements in between will be selected.
Press
to select all results.
5. Press to print your selection.
6. Press the <Statistics> button to print
a statistical report of the last 30 control
measurements or more, if available in database.
8. After printout, the database can be deleted by
pressing .
9. Before the database is deleted, enter the
password to initiate the procedure, if a password
has been activated under <Setup> .
10. Press to return to the
<Ready>
display.
Fig. 4-29 Select Controls
Fig. 4-30 Controls Measurement
Fig. 4-31 View Control Results