OPTIMedical OPTI CCA-TS, Operator'S Manual, Page: 6 / 271

Operating Safety Information
Operating Safety Information
 Overvoltage Category II when connected to a branch circuit.
 This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
Caution:
 The instrument is designed as a conventional device (closed, not waterproof type).
 Do not operate the instrument in an explosive environment or in the vicinity of explosive
anesthetic mixtures containing oxygen or nitrous oxide.
 This instrument is suitable for continuous operation.
 The power plug is to be plugged into a ground socket only. When using an extension cord,
make sure that it is of the proper size and is properly grounded.
 Any breakage of the ground lead inside or outside the instrument or a loose ground
connection can cause a hazardous condition when operating the instrument. Intentional
disconnection of the grounding is not permitted.
 When replacing the fuses, make sure that they are of the same type and rating as the
original fuses. Never use repaired fuses or short-circuit the fuse holders.
This device is a Class 1 Laser product according to the requirements of IEC 60825-1.
The maximum energy output is as follows:
670 nm (LED): 40 Microwatts max. for 400ms
780 nm (Laser): 40 Microwatts max. for 400ms
850 nm (Laser): 40 Microwatts max. for 400ms
Caution:
Use of controls or adjustments or performance of procedures other than those
specif ed herein may result in hazardous radiation exposure.