manualshive.com logo in svg

OPTIMedical OPTI CCA-TS, Operator'S Manual, Page: 176 / 271

Share
Download
OPTIMedical OPTI CCA-TS Operator'S Manual Download Page 176

Operator’s Manual – OPTI CCA-TS

 

 9-3

9 SUPPLIES

 

Description 

Part Number

9.7  Spare Parts 

Peripump Cartridge Kit 

BP7012

Power Supply 

EI7007

Power Cord 

EX0197

Power Cord, Europe 

EX0173

Printer Assembly  

BP7090

 

Please refer to OPTI CCA W/Touch Service Manual (PD7041) for other spare parts.

9.8  Technical Assistance

Most often, problems with your  OPTI CCA-TS can be resolved over the telephone, getting 

the analyzer back in service within minutes.  Our technicians have the training and experience 

necessary to provide dependable technical assistance.
The OPTI Medical Service Hotline (U.S. market only) is staffed to provide prompt 

troubleshooting assistance seven (7) days per week, twenty-four (24) hours per day.   

Should you need troubleshooting assistance or application information regarding your OPTI 

Medical analyzer just contact the OPTI Medical Service Hotline for assistance.
In the U.S., call 

1-800-490-6784 (OPTI) 

to request technical assistance from OPTI Medical 

Systems, Inc. 
Should you require additional service support, our OPTI Medical Service Hotline can provide 

complete details on all available service options and ensure that any instrument downtime is 

minimized. 

Summary of Contents for OPTI CCA-TS
















































































































































































































































































Reviews:

No comments