On-Net Surveillance Systems, Inc.
NetDVMS 6.5f User Manual
Input, Events & Output
139
2.
Click the >> button located between the All Outputs list and the On Manual Control list.
This will copy the selected output to the On Manual Control list.
An unlimited number of outputs may be selected this way.
You are able to determine each output’s position in NetGuard’s and NetGuard-EVS’s output list by
moving the selected output up or down in the On Manual Control list with the up and down
buttons located to the right of the list. The selected output is moved up one step each time you
click the up button. Likewise, each time you click the down button, the selected output is moved
down one step.
To remove an output from the On Manual Control list, simply select the required output, and click
the << button located between the All Outputs list and the On Manual Control list.
Selecting Output for Use on Motion Detection
You are able to select outputs to be triggered automatically when motion is detected in video from
the camera.
Tip: This feature does not require that a VMD (Video Motion Detection) event has been defined
for the camera in the I/O Setup window.
To select an output for use when motion is detected in video from the camera:
1.
Select the required output in the All Outputs list in the left side of the Output Settings for
[Device Name] [Camera Name] window.
Tip: When you select an output in the All Outputs list, you can view detailed
information about the selected output under Output Information in the lower part of the
window.
2.
Click the >> button located between the All Outputs list and the On Motion Detected list.
This will copy the selected output to the On Motion Detected list.
To remove an output from the On Motion Detected list, simply select the required output, and
click the << button located between the All Outputs list and the On Motion Detected list.
Tip: See also
About Input, Events & Output ...
