On-Net Surveillance Systems, Inc.
NetDVMS 6.5f User Manual
Input, Events & Output
111
Field
Description
Include
image from
camera
Available only if the Send e-mail if this event occurs check box is
selected.
Select check box to include an image, recorded at the time the input
event is triggered, in the e-mail alert, then select the required
camera in the list next to the check box.
Send SMS if
this event
occurs
Select check box to send an SMS alert when the input occurs.
Note: In order to be able to use SMS alerts, the SMS alert feature
must have been set up in the
SMS settings window
.
Multiple Input Events Window
The Multiple Input Events window is used for devices capable of handling several input events. It lets
you define which of the device's possible input events should be enabled, and whether any alerts
should be associated with enabled input events.
The Multiple Input Events window
Note: Before you specify input events for a device, verify that sensor operation is recognized by the
device. Most devices are capable of showing this in their configuration interfaces, or via CGI script
commands. Also check the release notes to verify that input and output controlled operations are
supported for the device and firmware used.
Access: You access the Multiple Input Events window by clicking the Add new event... button in the
I/O Setup window
. Note that this only applies when the device selected in the I/O Setup window is
capable of handling several input events. Some devices are capable of handling a single input event
only, in which case a different window, the
Add New Event window (for devices capable of handling
one input event only)
, will open when the Add new event... button is clicked.
