Omron G3PW, User Manual

Page: 92 / 120

77
Services and Addresses Section 6-4
Variable Type C1/81 (Adjustment Level Parameters)
Note Use address 0000 to set the communications main setting (input variable)
from the PLC.
Variable Type C3/83
Address Data Data range Notation
0000 Communications Main Setting H’00000000 to H’000003E8 The data range is ten times
the actual values.
0001 Communications Main Setting
0002 Communications Main Setting
0003 Communications Main Setting
0004 Communications Main Setting
0005 Communications Main Setting
0006 Communications Main Setting
0007 Communications Main Setting
0008 Internal Duty Setting H’00000000 to H’000003E8
0009 Base-Up Value H’00000000 to H’000003E8
000A Soft-start Up Time H’00000000 to H’000003E7
000B Soft-start Down Time H’00000000 to H’000003E7
000C Output Upper Limit H’00000000 to H’000003E8
000D Output Lower Limit H’00000000 to H’000003E8
000E Heater Burnout Threshold H’00000001 to H’00000064 ---
000F Heater Characteristic Resistance for Phase
Control H’00000000 to H’000003E7 The data range is ten times
the actual values.
0010 Heater Characteristic Resistance for Opti-
mum Cycle Control H’00000000 to H’000003E7
0011 Heater Burnout Detection Lower Limit H’00000000 to H’000003E8
Address Data Data range Notation
0000 Communications Data
Length H’00000000 or H’00000001 0: 7 bits
1: 8 bits
0001 Communications Stop Bits H’00000000 or H’00000001 0: 1 bit
1: 2 bits
0002 Communications Parity H’00000000 to H’00000002 0: None
1: Even
2: Odd
0003 Send Wait Time H’00000000 to H’00000063 0 to 99 ms
0004 Communications Timeout
Time H’00000000 to H’000003E7 0: Communications timeout function disabled
0 to 999 s
0005 Communications Unit
Number H’00000000 to H’00000063 0 to 99
0006 Communications Baud
Rate H’00000000 to H’00000003 0: 9.6 k bit/s
1: 19.2 k bit/s
2: 38.4 k bit/s
3: 57.6 k bit/s