Omron G3PW, User Manual

Page: 91 / 120

76
Services and Addresses Section 6-4
6-4 Services and Addresses
FINS-mini Command
Services
Note Service requests will not be accepted and no response will be re-
turned if there is a RAM error or the Controller is in standby status.
(Standby status exists from when power is turned ON until normal
operation is possible.)
Addresses
Variable Type CE/8E (Monitor Level Parameters)
* The data ranges apply to all models of the G3PW.
MRC SRC Service Description
01 01 Variable Area Read Reads data from the variable area.
01 02 Variable Area Write Writes data to the variable area.
05 03 Controller Attribute Read Reads the model number and communica-
tions buffer size of the Controller.
06 01 Controller Status Read Reads operating status.
08 01 Echo-back Test Performs an echo-back test.
30 05 Operation Command Performs operation commands, such as
resetting and changing areas.
Address Data Data range
*
Notation
0000 Input Monitor H’00000000 to H’000003E8 The data range is ten times
the actual values.
0001 Duty Monitor H’00000000 to H’000003E8
0002 Output Monitor H’00000000 to H’000003E8
0003 Phase Angle Monitor H’00000000 to H’000003E8
0004 Current Monitor H’00000000 to H’000002EE
0005 Total Run Time Monitor H’00000000 to H’000003E7
0006 Status H’00000000 to H’00000*** Bit fields
0007 Not used. Always 0. 0
0008 Not used. Always 0. 0
0009 Not used. Always 0. 0
0010 Not used. Always 0. 0
0011 Not used. Always 0. 0
0012 Not used. Always 0. 0
0013 Not used. Always 0. 0
0014 Version H’00000000 to H’00000*** 1.23 = 00000123