Omron G3PW, User Manual

Page: 83 / 120

68
Communications Settings Section 6-1
Example: Setting Communications Parameters
6-1-3 Connection Example
Setting the G3PW Communications Unit Numbers to the Same Numbers as the EJ1
Channel Numbers
An EJ1 TC4 Unit has four channels. It can thus be connected to up to four
G3PW Power Controllers.
Setting Example
1,2,3... 1. The G3PW communications unit numbers [P19] can be set to the same
numbers as the EJ1 channel numbers, as shown below.
Display the initial settings mode screen, and then use the Up and Down Keys
to display
p19
(the parameter for which the setting is to be changed in this
example).
When the ENT/RST Key is pressed, the present set value for
the selected parameter will be displayed.
Use the Up and Down Keys to set a new value.
The data display will flash.
Press the ENT/RST Key to enter the new setting. The data display will
stop flashing, and the parameter display will return.
p01
p19 26
20
ENT
RST
ENT
RST