Omron F3SG-R Series, User Manual

Page: 68 / 128

48
Chapter
4
Dimens
io
ns
F3SG-4RA-25-02TS
User’s Manual
Wiring/Installation
4-3-2. Mounted with Top/Bottom Brackets (F39-LGRTB) and
Intermediate Bracket (F39-LGRA)
4-3-2-1. Backside Mounting
4-4-3-2. Mounting with Top/Bottom Bracket (F39-LGRTB- □ ) and Intermediate Bracket (F39-LGRA)
- Use the brackets of specified quantities and locations according to the dimensions. The other brackets than described
above may not meet the specified ratings and performance.
- When you use the sensor in a situation where the sensor is under a load, increase the number of the brackets used.
- This bracket allows beam alignment after fixing the bracket to a wall surface.
- The angle adjustment range is ±22.5° when using the Top/Bottom Brackets only. The angle adjustment range is ±15°
when using the Top/Bottom Brackets and Intermediate Bracket together.
31.4
10
10
P
D
N1
7.5
N2
46.35
H
I
56.5
C
3.95
F
F
19
5.5
G
19
19
G
56.5
C
3.95
F
H
2-M4
φ9
<Screw for Top/Bottom
Bracket: M5> <Screw for Top/Bottom
Bracket: M8>
4-M5
2-M8
50
2-M4
12
3
38
Intermediate Bracket
(F39-LGRA)
Top/Bottom Bracket
(F39-LGRTB)
Top/Bottom Bracket
(F39-LGRTB)
26.3
73
6.3
3.95
56.5
Backside:2-M4
C(Protective height)
2-M5 or M6 2-M5 or M6
[ Unit : mm ]
*The number of brackets required to mount either one of emitter and receiver.
Dimension
C 4-digit number of the type name (Protective height)
Dimension
D C-20
Dimension
G C+27.2+N1+N2
Dimension
H C+38+N1+N2
Dimension
I C+58+N1+N2
Dimension
N1 0 to 30
Dimension
N2 0 to 13
Dimension
P 20
Protective height (C)
Number of Top/Bottom Brackets * Number of Intermediate Brackets *
Dimension
F
0240 to 1040 2 0 -
1120 to 1920 2 1 1000 mm
max.