66
Chapter
4
M
ount
in
g
F3SG-4RA-25-02TS
User’s Manual
Wiring/Installation
5.
Securely tighten the Mounting Screw to fix the Intermediate Bracket to the F3SG-R housing. The
recommended torque to tighten the Mounting Screw is 3.0 N•m. Then loosen the Alignment Screw
(hexagon socket head cap screw (M4×22)) of the Intermediate Bracket. (Fig. 6)
Tightening screws with a torque that considerably exceeds the recommended torque may cause failure.
6.
Securely tighten screws to fix the Top/Bottom Bracket to the mounting position of the wall surface. (Fig.
7)
- One screw at upper and lower positions, respectively, is sufficient to fix the F3SG-R to the wall surface.
- Screws to mount the brackets to the wall are not included.
Fig. 6
Mounting Screw
Alignment Screw
(hexagon socket head
cap screw (M4×22))
Mounting Screw
Alignment Screw
1. Securely tighten this
2. loosen this
Fig. 7
<Backside mounting>
<Side mounting>
M5/M6
M5/M6
Summary of Contents for F3SG-R Series
Page 19: ...xvii F3SG 4RA 25 02TS User s Manual Introduction E 7 4 Revision History 107...
Page 20: ...xviii Introduction F3SG 4RA 25 02TS User s Manual...
Page 52: ...32 Chapter 3 End Cap F3SG 4RA 25 02TS User s Manual Setting with Rotary Switch and End Cap...
Page 112: ...92 Chapter 6 Maintenance Checklists F3SG 4RA 25 02TS User s Manual Checklists...