Omron F3SG-R Series, User Manual

Page: 66 / 128

46
Chapter
4
Dimens
io
ns
F3SG-4RA-25-02TS
User’s Manual
Wiring/Installation
4-3-1-2. Side Mounting
4-4-3-1. Mounting with Free-Location Brackets (F39-LGRA)
- Use the brackets of specified quantities and locations according to the dimensions. The other brackets than described
above may not meet the specified ratings and performance.
- When you use the sensor in a situation where the sensor is under a load, increase the number of the brackets used.
- This bracket allows beam alignment after fixing the bracket to a wall surface. The angle adjustment range of the bracket
is ±15°.
31.4
10
10
P
D
F
56.5
F C
56.5
2-M4
2-M4
38
50
16.3
73
6.3
23.5
56.5
(F39-LGRA)
(F39-LGRA)
46.35
C(Protective height)
150 max.
150 max.
150 max.
150 max.
2-M5 or M6
<Screw: M5 or M6>
2-M5 or M6
Free-Location Bracket
Free-Location Bracket
[ Unit : mm ]
*1. The number of brackets required to mount either one of emitter and receiver.
*2. Mounting an emitter or receiver with one bracket is possible for the model of protective height of 0240. In this case, locate
this bracket at half the Dimension C (or at the center of the sensor length).
Dimension C 4-digit number of the type name (Protective height)
Dimension D C-20
Dimension P
20
Protective height (C) Number of Free-Location Brackets *1 Dimension F
0240 to 1200 2 *2 1000 mm max.
1280 to 1920 3 1000 mm max.