Omron EJ1G, User Manual

Page: 143 / 237

122
Other HFU Functions
Section 5-7
5-7-2 Event Inputs (TC2)
Event Input
Assignment
There are two event inputs in the TC2.
The following diagram shows the parameters that can be set in event input 1
or event input 2.
Some of the parameters are for all channels and others are for individual
channels.
Note This parameter can be set only when operation is stopped.
When this parameter has been changed, the new setting becomes effective
the next time a software reset is performed for the Unit or the next time power
is turned ON.
Controlling Operation with
the Event Input’s ON/OFF
Status • Operation can be switched by OFF-to-ON or ON-to-OFF event-input tran-
sitions.
■
Stop (0)/Run (1), Run (0)/Stop (1), Auto (0)/Manual (1)
Variable type Parameter name Setting range Default
F2/B2 Event Input 1 to 4 Assignment
(Common)
0 to 69 0
Conditions for use No special conditions.
Channel 64
Disabled
Stop (0)/Run (1)
Bank (bit 1)
Auto (0)/Manual (1)
Bank (bit 0)
All channels
Run (0)/Stop (1)
Channel 3
Channel 2
Stop (0)/Run (1)
Bank (bit 1)
Auto (0)/Manual (1)
Run (0)/Stop (1)
Channel 1
Bank (bit 0)
EV2 to EV4 can be set in the same way.
EV2
Settable
parameters
EV1
EV3 EV4
ON
OFF
Parameter Event input Description
Stop (0)/Run (1) OFF Stop
ON Run
Run (0)/Stop (1) OFF Run
ON Stop
Auto (0)/Manual (1) OFF Auto
ON Manual