Omron EJ1G, User Manual

Page: 144 / 237

123
Other HFU Functions
Section 5-7
5-7-3 Auxiliary Output Allocations
The parameters that can be set for auxiliary outputs 1 to 4 are outlined below.
The settable parameters include those for all channels and those for individual
channels.
Note (1) This parameter can be set only when operation is stopped.
When this parameter has been changed, the new setting becomes effec-
tive the next time a software reset is performed for the Unit or the next
time power is turned ON.
(2) Refer to Parameter List on page 175 for details on parameter settings.
5-7-4 Using G3ZA Multi-channel Power Controllers
Set the G3ZA settings in the TC4/2 Unit. Refer to 4-5-1 Using G3ZA Multi-
channel Power Controllers for details.
Temperature
Controller Error The Temperature Controller Error output will turn ON when any
bit between bit 0 and bit 13 is ON in the Device A Status. It can
be used to output EJ1G error status.
Refer to Status Lists on page 188 for details on Device A Sta-
tus.
Event inputs 1 to 4 Output the ON/OFF status of event inputs 1 to 4.
Bus inputs 1 to 3 Output the ON/OFF status of bus inputs 1 to 3.
Variable type Parameter name Setting range Default
F2/B2 Auxiliary Output 1 Assignment (Common) 0 to 2053 4
Auxiliary Output 2 Assignment (Common) 0 to 2053 5
Auxiliary Output 3 Assignment (Common) 0 to 2053 6
Auxiliary Output 4 Assignment (Common) 0 to 2053 10
Conditions for use No special conditions.
Channel 64
Channel 3
Channel 2
Disabled
OUT2, OUT3, and OUT4 can be set in the same way.
All alarm AND
All alarm OR
Alarms 1 to 3 AND
Temperature Controller Error
All channels
Alarms 1 to 3 OR
All alarms AND
All alarms OR
Alarms 1 to 3
Channel 1
Input error
OUT2
Settable
parameters
OUT1
OUT3 OUT4
Input error OR