Omron EJ1G, User Manual

Page: 220 / 237

199
Status Lists
Appendix
Configuration Error A Status
Configuration Error B Status
Bit position Status Bit description Meaning
0 1
Bit 0 Undefined Expand
Units. No error Error A Unit that is not recoginized is connected.
Bit 1 No Basic Unit No error Error No Basic Units are registered and no TC4/TC2
Units are connected.
Bit 2 Too Many Basic Units No error Error More than 16 TC4/TC2 Units are connected.
Bit 3 Not used.
Bit 4 Basic Unit Connection
Fault No error Error The configuration has been registered, but the reg-
istered TC4/TC2 Units cannot recoginized.
Bit 5 Basic Unit Startup Error No error Error A configuration error has occurred for the TC4/TC2
Units.
Bit 6 Not used.
Bit 7 Not used.
Bit 8 Illegal Unit Arrangement No error Error A Unit is connected to the left of the HFU.
Bit 9 Not used.
Bit 10 Not used.
Bit 11 Not used.
Bit 12 Illegal Restart Error No error Error Only the HFU was reset during operation.
Bit 13 Invalid Registration
Error No error Error The configuration registered without any TC4/TC2
Units.
Bit 14 Control Group Setting
Error No error Error There is an error in the group settings.
Bit 15 Not used.
Bit position Status Bit description Meaning
0 1
Bit 0 Basic Unit 1 Error No error Error An error occurred in a TC2 or TC4 Unit after the
configuration was registered.
Bit 1 Basic Unit 2 Error No error Error
Bit 2 Basic Unit 3 Error No error Error
Bit 3 Basic Unit 4 Error No error Error
Bit 4 Basic Unit 5 Error No error Error
Bit 5 Basic Unit 6 Error No error Error
Bit 6 Basic Unit 7 Error No error Error
Bit 7 Basic Unit 8 Error No error Error
Bit 8 Basic Unit 9 Error No error Error
Bit 9 Basic Unit 10 Error No error Error
Bit 10 Basic Unit 11 Error No error Error
Bit 11 Basic Unit 12 Error No error Error
Bit 12 Basic Unit 13 Error No error Error
Bit 13 Basic Unit 14 Error No error Error
Bit 14 Basic Unit 15 Error No error Error
Bit 15 Basic Unit 16 Error No error Error
C4/84 0002
C4/84 0003