72
Transistor Output Units
Section 4-4
Terminal Arrangement
Connector Pin Arrangement
The following diagram shows the pin arrangement for the connector.
Wiring
Attach MOLEX connectors to the Transistor Output Unit and connect them to
external devices.
Applicable Connectors
Wiring Examples
Note V terminals and V connector pins, as well as G terminals and G connector
pins, are internally connected. When the I/O power is being supplied from a
terminal block, the power can be supplied to the output devices from the V
and G connectors. Current supplied in this way, however, must be less than
2 A.
Output
Output
Signal
G
V
Manufac-
turer
Connector
Model number
Remarks
MOLEX
Pressure-
welded
Housing
521-09-0390
For AWG#24
Crimp
Housing
50-57-9403
---
Reeled contacts
16-02-0069
For AWG#24 to 30
16-02-0086
For AWG#22 to 24
Loose contacts
16-02-0096
For AWG#24 to 30
16-02-0102
For AWG#22 to 24
Crimping tool
570-36-5000
For AWG#22 to 26
11-01-0209
For AWG#24 to 30
I/O power
supply
Solenoids,
valves, etc.
24 VDC
+
−
Summary of Contents for DRT1-COM
