xiii
Application Precautions
5
• Take appropriate and sufficient countermeasures when installing systems
in the following locations.
• Locations subject to static electricity or other forms of noise.
• Locations subject to strong electromagnetic fields.
• Locations subject to possible exposure to radioactivity.
• Locations close to power supplies.
!Caution
The operating environment of the PC System can have a large effect on the
longevity and reliability of the system. Improper operating environments can
lead to malfunction, failure, and other unforeseeable problems with the PC
System. Be sure that the operating environment is within the specified condi-
tions at installation and remains within the specified conditions during the life
of the system.
5
Application Precautions
Observe the following precautions when using the MULTIPLE I/O TERMINAL.
!WARNING
Failure to abide by the following precautions could lead to serious or possibly
fatal injury. Always heed these precautions.
• Always ground the system to 100
Ω
or less when installing the system to
protect against electrical shock.
• Always turn OFF the power supply to the system before attempting any of
the following. Performing any of the following with the power supply turned
ON may lead to electrical shock:
• Mounting or removing any Units (e.g., Power Supply Unit, I/O Units,
CPU Unit, etc.) or memory cassettes.
• Assembling any devices or racks.
• Connecting or disconnecting any cables, connectors, or wiring.
!Caution
Failure to abide by the following precautions could lead to faulty operation of
or damage to the MULTIPLE I/O TERMINAL. Always heed these precautions.
• Use the Units only with the power supplies and voltages specified in the
operation manuals. Other power supplies and voltages may damage the
Units.
• Take measures to stabilize the power supply to conform to the rated sup-
ply if it is not stable.
• Provide circuit breakers and other safety measures to provide protection
against shorts in external wiring.
• Do not apply voltages exceeding the rated input voltage to Input Units.
The Input Units may be destroyed.
• Do not apply voltages exceeding the maximum switching capacity to Out-
put Units. The Output Units may be destroyed.
• Always disconnect the LG terminal when performing withstand voltage
tests.
• Install all Units according to instructions in the operation manuals.
Improper installation may cause faulty operation.
• Be sure to tighten Backplane screws, terminal screws, and cable connec-
tor screws securely.
• Do not attempt to take any Units apart, to repair any Units, or to modify
any Units in any way.
Summary of Contents for DRT1-COM
