Getting Started FLUOVIEW
/Online Help
OPERATION INSTRUCTIONS
1 - 5 3
Page
2. Click the <Scan Unit> button at the bottom of the panel. The window as shown below will
appear.
Fig. 1-17 [Optical System Configuration] Window
Virtual channels can be used. For the virtual channels, see section 2-2-8-1,
“Virtual Channel”.
3. To change the displayed filter types, use the [Excitation DM], [Beam splitter] and/or
[Barrier Filter] drop-down lists.
4. After completing the fitler setup, click the <Close> button to close the window.
[Laser Unit] group box
Shows the type of laser to be used. (With the laser combiner operation, the laser type is set and
displayed automatically.) When the <On> button is depressed, the laser is oscillating the beam.
When the <Stby> button is depressed, the laser is not oscillating. When the [Auto standby]
check box is checked, the [After] text box appears below it. When not using laser for a long time,
in order to suppress useless electric-power consumption, we recommend you making <Stby>
mode. The laser oscillation stops when the time shown in this box has elapsed after the end of
laser scanning. The laser oscillation stops when the time shown in this box has elapsed after
the end of laser scanning. The laser is suspended as standby mode (using Ar or Kr-laser) or the
laser oscillation stops (using UV-Ar laser) When the time shown in this box has elapsed after
the end of laser scanning.
[Excitation DM] and [Beam
splitter] drop-down lists
Change the excitation filter and
beam splitter of each channel.
[Barrier Filter] drop-down list
Changes the barrier filter of each channel.
[TD Unit] group box
Shows the transmitted light detection.
[Dyes]
Shows the dyeing method set for
each channel.
[Z Resolution]
Shows the Z resolution set for each
channel.
Clicking this area causes the [Microscope
Configuration] window to appear.
TIP
[Fit C.A. for change of Objective Lens]
Check box
In case of check this box, Confocal Aperture
diameter is set with switching the objective.
[
XY Resolution]
Shows lateral resolution for each
channel,
