APPLIED OPERATIONS
/Image Analysis
OPERATION INSTRUCTIONS
2 - 2 8 7
Page
2-7-3-3 Measuring the Change in Mean Value of Intensity
The mean value of the intensity in a region specified in an image can be measured and
displayed graphically.
1.
Select <Analysis-Series> button on tool bar and bring [Series] sub-panel.
2.
Display the image window of the image that you want to check the intensity at the front.
3. When the image is composed of multiple image slices,
operations will be applied to each slice of the image. When the image is composed of a
single image slice or when one of the multiple image slices is selected, the [Single Slice
Integration] group box appears as shown below. Select the direction of interest (X or Y)
using the option buttons.
When the selected image was acquired in the XY observation
mode, the [Single Slice Integration] group box shows the option
buttons for selection of the X- or Y-direction. When the selected
image was acquired in the XT observation mode, the option
buttons for selection of the X- or T-direction are displayed.
Example) When the direction of interest is selected in the [Single Slice Integration] group box,
line-by-line computation operation starts on the perpendicular lines to the selected
direction. For example, an image acquired in XY observation is checked as shown
below.
Y
↑
¤
X
( When the X-direction is selected )
( When the X-direction is selected )
¤
X
Y
↑
<Analysis-Series> button
NOTE
