Olympus Fluoview FV1000 User Manual Download Page 320

Page: 320 / 540

APPLIED OPERATIONS

/Image Processing

OPERATION INSTRUCTIONS

2 - 2 3 6

Page

Enclose the histogram section of interest using the scale in the [Master View] field.

The magnified view of the region selected by the scale is shown in the [Selected View]

field.

Fig. 2-89 Histogram of the Selected Region

8. When the image was acquired in the multi-channel mode, select the channel(s) to be

subjected to LUT intensity mapping (re-assignment) using the [Channel] option buttons.

9. Select the region to be subjected to mapping (re-assignment) using the scale in the

[Selected View] field. While moving the scale, confirm the change in contrast in the

image window. The intensity values in the selected region are mapped (re-assigned) to

intensity values from 0 to 255 and displayed.

The vertical chart axis
represents the degree and
the horizontal axis
represents the mapped
intensity values.

Summary of Contents for Fluoview FV1000





























































































































































































































































































































































































































































































































































Search results

Summary of Contents for Fluoview FV1000

Reviews:

Olympus Fluoview FV1000, User Manual, Page: 320 / 540

Search results

Summary of Contents for Fluoview FV1000

Reviews: