background image

APPLIED OPERATIONS

/Viewing 3D Image

OPERATION INSTRUCTIONS

2 - 3 1 2

Page

2-9-3 Building Stereo 3D Images

Images composed of multiple image slices acquired by varying the multiple sections (XYZ

observation) can be built into a pair of stereo 3D images. These images can be viewed

three-dimensionally by watching them with two eyes for a while.

The operation is similar with animation. Perform steps 1 to 10 in section 2-9-2, “Animation”,

then proceed to the following steps. (Except that, in the [Method] group box, it is required to

click the [Brightest] option button.)

1.  Check the [Stereo Pair] check box.

2.  Click the <Begin Visualize> button to start building the images. When the building

completes, the built images are displayed in the [3D Animation] panel.

The status bar shows the progress of building processing.

During the building, the <Begin Visualize> button turns into the <Cancel

Visualize> button. Click the <Cancel Visualize> button if you want to cancel the

building.

3. 

The following buttons are displayed at the top of the image window.

   

4.  Watch the two images with two eyes for a while. They will look as a single 3D image.

<Cancel Visualize>

button

TIP

TIP

Stereo 3D images.

Summary of Contents for Fluoview FV1000





























































































































































































































































































































































































































































































































































Reviews: