APPLIED OPERATIONS
/Viewing 3D Image
OPERATION INSTRUCTIONS
2 - 3 0 7
Page
2-9-1 Successive Display of Images
Images composed of multiple image slices acquired by varying the multiple sections (XYZ
observation, XYZT observation) can be displayed successively using the buttons at the top
of the image window as shown below.
1. Display the image window of the image composed of multiple image slices.
2. The buttons as shown below are displayed at the top of the image window. If the <XYZ
series> button is not displayed under the <Z/T series switch> button while the images
were acquired in XYZT observation mode, click the <Z/T series switch> button and click
the <XYZ series> button in the displayed list of buttons.
⋅
• • •
<XYZ series> button
Displays one of multiple images by selecting
it according to the multiple sections (Z).
<Set start position> button
When successive display or frame-by-frame display
is required, set the image with which the display
should start. (“0” is set when this button is not used.)
<Display> button
Press to start display of n-slices of image from the start position to the end position
sequentially (successive display) or one by one (frame-by-frame display) or to stop
successive display.
Holding the button displays image slices in successive display and clicking it displays
image slices by advancing frame by frame.
<Display> button
Press to start display of n-slices of image from the end position to the start position sequentially
(successive display) or one by one (frame-by-frame display) or to stop successive display.
Holding the button displays image slices in successive display and clicking it displays image slices
by advancing frame by frame.
<Bound> button
Every time successive display or frame-by-frame display in a direction ends
at the start or end position, the display is restarted in the opposite direction.
<Set end position> button
When successive display or frame-by-frame display
is required, set the image with which the display
should end. (Assuming that the number of images is
n, “n-1” is set when this button is not used.)
<Z/T series switch> button
<XYT series> button
Displays one of multiple images by selecting
it according to the time (T).
<Loop> button
Successive display or frame-by-frame display is repeated
in the same direction.
<Loop/Bound switch>button
<Display speed switch> button
Set the speed of successive display.
<Rabbit> button
Press for successive display of image slices without pause.
<Turtle> button
Press for successive display of image slices at an interval of 0.8 sec.
