Oki CX2731MFP Advance User Manual Download Page 260

Page: 260 / 311

260

– Issues:

Error Messages

MC361/MC561/CX2731 MFP Advanced User’s Guide

Getting Target IP
Failed
Check DHCP
Settings

Please see Help for
details

Blinks

The MFP could not get
IP address from DHCP
server.
Check the network
configuration, cable
connection and status,
and the server status.

Check DNS Settings

Please see Help for
details
\356\200\204Close

Blinks

An error occurred while
connecting to a DNS
server, or the MFP
failed to obtain IP
address.
• Check the network

configuration, cable
connection and sta-
tus, and the server
status.

• Check the DNS set-

tings.

Check Server
Setting

Please see Help for
details
\356\200\204Close

Blinks

An error occurred while
connecting to a file
server.
• Check the network

configuration, cable
connection and sta-
tus, and the server
status.

• Check the server set-

tings.

Server Login Failed

Please see Help for
details
\356\200\204Close

Blinks

Logging in to file server
failed.
Check the ID and
password for the
server.

Code

Message

<STATUS>

key

Cause/Remedy

Summary of Contents for CX2731MFP
























































































































































































































































































































Search results

Summary of Contents for CX2731MFP

Reviews:

Related manuals for CX2731MFP

Brands by name

Popular brands

Oki CX2731MFP, Advance User Manual

Search results

Summary of Contents for CX2731MFP

Reviews:

Related manuals for CX2731MFP

Brands by name

Popular brands