Oki CX2731MFP Advance User Manual Download Page 300

Page: 300 / 311

300

– Issues:

MFP Issues

MC361/MC561/CX2731 MFP Advanced User’s Guide

The MFP does not
start printing.

An error is displayed
on the panel.

Check the error code and
follow the on-screen
instructions.

The Ethernet or USB
cable is unplugged.

Plug in the Ethernet or
USB cable firmly.

Something is wrong
with the Ethernet or
USB cable.

Use another Ethernet or
USB cable.

The MFP does not
support your Ethernet
or USB cable.

• Use a USB 2.0

compatible cable.

• Use an Ethernet

10BASE-T/100BASE-

TX compatible cable.

Something may be
wrong with the
printing function.

Press the <SETTING> key
and select [Reports] >
[Configuration] and print
out the configuration list
to check the printing
performance.

The interface is
disabled.

Press the <SETTING> key
and select [Admin Setup]
> [Network Menu] >
[Network Setup] and
enable the interface you
are using.

The printer driver of
the MFP is not
selected.

Set the printer driver of
the MFP as the default
printer.

The specified port of
the printer driver is
wrong.

Specify the port the
Ethernet or USB cable is
connected to.

The display screen
is blank.

The MFP is in the sleep
mode.

Check if the <POWER
SAVE> key lights up and
press the <POWER SAVE>
key to activate the MFP.

Symptom

Cause

Remedy

Summary of Contents for CX2731MFP
























































































































































































































































































































Search results

Summary of Contents for CX2731MFP

Reviews:

Related manuals for CX2731MFP

Brands by name

Popular brands

Oki CX2731MFP, Advance User Manual

Search results

Summary of Contents for CX2731MFP

Reviews:

Related manuals for CX2731MFP

Brands by name

Popular brands