Oki CX2731MFP Advance User Manual Download Page 23

Page: 23 / 311

– Copying:

Setting Margins ‘

MC361/MC561/CX2731 MFP Advanced User’s Guide

• To create a margin at the top of the output, specify a

negative value.

• To create a margin at the bottom of the output, specify a

positive value.

Note

Specify the same absolute value (if one value is positive and the

other is negative) set in the [Top] margin for both the [Front]

and [Back] margins.

Press the down or up arrow key to specify the [Left] margin for

[Back Margin], then press <OK>.

• To create a margin on the left side of the output, specify a

negative value.

• To create a margin on the right side of the output, specify a

positive value.

Note

Specify the same absolute value (if one value is positive and the

other is negative) set in the [Left] margin for both the [Front]

and [Back] margins.

Press the left arrow key repetitively to back out to the copy

standby screen.

Use the numeric keypad to enter the number of copies.

Press the Mono Start or Color Start key.

Summary of Contents for CX2731MFP
























































































































































































































































































































Search results

Summary of Contents for CX2731MFP

Reviews:

Related manuals for CX2731MFP

Brands by name

Popular brands

Oki CX2731MFP, Advance User Manual

Search results

Summary of Contents for CX2731MFP

Reviews:

Related manuals for CX2731MFP

Brands by name

Popular brands