Oki CX2731MFP Advance User Manual Download Page 93

Page: 93 / 311

– Printing:

Manual Printing‘

MC361/MC561/CX2731 MFP Advanced User’s Guide

Printing

Important!

• The display and procedure may differ according to the

operating system, the applications, and the version of the

printer driver you are using. This section uses Windows 7

and Mac OS X 10.6, and Wordpad and TextEdit as

examples.

• For additional information on the setting items on the

printer driver, refer to its online help.

Using the Control Panel Arrow Keyss

When using the arrow keys, press the key

repetitively to go to the selection.

Manual Printing‘______________

You can print a document feeding the print media one sheet at a time

from the MP tray. After each page is printed, a message appears on

the MFP display requesting that paper be loaded on the MP tray. Once

the print media is loaded, select [Restart] on the message to

continue printing.

Windows PCL/PCL XPS Printer Driver

Load print media on the MP tray.

In your application, open the file you want to print.

From the “File” menu, select “Print”.

Summary of Contents for CX2731MFP
























































































































































































































































































































Search results

Summary of Contents for CX2731MFP

Reviews:

Related manuals for CX2731MFP

Brands by name

Popular brands

Oki CX2731MFP, Advance User Manual

Search results

Summary of Contents for CX2731MFP

Reviews:

Related manuals for CX2731MFP

Brands by name

Popular brands