Oki CX2731MFP Advance User Manual Download Page 65

Page: 65 / 311

– Scanning:

Scan to E-mail

MC361/MC561/CX2731 MFP Advanced User’s Guide

Scanning

Using the Control Panel Arrow Keys

When using the arrow keys, press the key

repetitively to go to the selection.

Scan to E-mail _______________

Note

The following procedures assume that [Continuous Scan] is

disabled

For the basic procedures when [Continuous Scan] is enabled,

refer to the Basic User’s Guide on the DVD supplied with your

MFP.

Setting Sender and Reply To Addresses

To set the e-mail address from which e-mails are sent and the

address to which responses are sent.

Press the <SETTING> key.

Use the down arrow key to select [Admin Setup], then press

<OK>.

Enter the administrator password.

Summary of Contents for CX2731MFP
























































































































































































































































































































Search results

Summary of Contents for CX2731MFP

Reviews:

Related manuals for CX2731MFP

Brands by name

Popular brands

Oki CX2731MFP, Advance User Manual

Search results

Summary of Contents for CX2731MFP

Reviews:

Related manuals for CX2731MFP

Brands by name

Popular brands