Oki CX2731MFP Advance User Manual Download Page 82

Page: 82 / 311

– Scanning:

Drivers and Software

MC361/MC561/CX2731 MFP Advanced User’s Guide

Advanced Mode

You can adjust in detail how a document is scanned.

Follow the procedure for "Starting a Scan Job (for Mac OS X)" on

page 43 through step 8.

Select “Advanced” under “Mode”.

Change the settings if necessary.

Click “Scan” to start scanning.

If you want to finish the setting, click “Quit”.

Using WIA Driver: Windows Only

To use the WIA driver, the MFP must be connected to the computer

via the USB port. It doe not work with networks.

Note

• The WIA driver does not support Mac OS X.
•

WIA 2.0:

supports Windows 7/ Windows Server 2008 R2.

•

WIA 1.0:

supports Windows Vista/ Windows Server 2008/

Windows XP/ Windows Server 2003.

Starting a Scan Job

Note

The explanations in this section use the MC561 and PaperPort as

an example.

Place your document with text face up in the ADF or face down

on the document glass.

Press the <SCAN> key.

Summary of Contents for CX2731MFP
























































































































































































































































































































Search results

Summary of Contents for CX2731MFP

Reviews:

Related manuals for CX2731MFP

Brands by name

Popular brands

Oki CX2731MFP, Advance User Manual

Search results

Summary of Contents for CX2731MFP

Reviews:

Related manuals for CX2731MFP

Brands by name

Popular brands