301
– Issues:
MFP Issues
MC361/MC561/CX2731 MFP Advanced User’s Guide
Print data is not
transmitted to the
MFP.
The Ethernet or USB
cable is broken.
Connect a new cable.
The time-out period
set on the computer
has passed.
Set a longer time-out
period.
There is an
abnormal sound.
The MFP is inclined.
Place the MFP on a flat
surface.
There is a piece of
paper or unknown
object inside the MFP.
Check the inside of the
MFP and remove any
objects.
The top cover is open.
Close the top cover.
There is a buzzing
sound.
The MFP is printing on
the heavy or thin
paper when the
temperature inside is
high.
This is not a malfunction.
You can proceed with the
operation.
It takes a while to
start printing.
The MFP is warming
up from the power
save or sleep mode.
Press the <SETTING> key
and select [Admin Setup]
> [User Install] > [Power
Save Enable]/[Sleep] and
disable both modes.
The MFP may be
cleaning the image
drum unit.
Wait for a while.
The MFP is adjusting
the temperature of the
fuser unit.
Wait for a while.
The MFP is processing
a data from another
interface.
Wait until the process
finishes.
The print result
does not change
though you have
changed the
[Density] setting.
You have also changed
the [RGB] setting.
The [Density] setting is
automatically changed
according to the [RGB]
setting.
If the print result is not
what you expected,
change the [RGB] setting
again.
Symptom
Cause
Remedy
