Odetics
Telecom
GPStar
plus
Model 365
365-8006
Display Menus and Controls 5 - 28
5.5
MENU 8 - OPTION MENU DESCRIPTIONS
The following paragraphs describe in detail the information displayed on each of the
operating screens, and how the user can change operating parameters associated with
any options installed in the unit. The Option screens are accessed in Menu 8. The
screens can only be selected if an option is installed in the unit.
5.5.1
High Frequency Direct Digital Synthesizer (Other Option -1)
If the High frequency Direct Digital Synthesizer is installed, the version of the
Synthesizer option is displayed momentarily after the menu is accessed.
•
Press key 8 to view the type of option installed in the unit.
Option Slot Menu
≡
Synthesizer Installed - HF
The above information screen is automatically replaced with the following screen.
Synthesizer Frequency:1 000 000 Hz
≡
Sinusoid:On Differential:Off
This screen indicates the Factory Default settings for the HF Synthesizer version:
output frequency of 1 MHz (1000000 Hz), the Sinusoid output port enabled (On), and
the Differential output port disabled (Off). After subsequent application of input power,
the screen indicates the frequency and port setup selected by the user prior to the
removal of input power. To change the output frequency or to enable/disable the output
ports:
•
Press the Edit key to enter the edit mode.
Synthesizer Frequency:
0
1 000 000 Hz
≡
Sinusoid:On Differential:Off
•
Use the arrow and numeric keys to select the output frequency.
Note: The frequency can only be changed is 5 Hz steps. Any entries made from 0 to 9
Hz (except 5) will be automatically rejected.
•
Press the Enter key to accept the selected frequency, or press the Menu key to
exit edit mode without making any changes in the output frequency, or:
•
Press the arrow keys to enable
(On)
or disable
(Off)
the Sinusoid output port.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
