Odetics
Telecom
GPStar
plus
Model 365
365-8006
Display Menus and Controls 5 - 5
5.3.1
MENU 1 - TIME
Reference I/O commands: ANTD, AZEL, SIGQ, SSLT, TIME, TIMM
•
Screen 1 - Time, Date, Status, Satellites
- Displays the time reference (UTC,
Local UTC, GPS, Local GPS, or Manual), the current time and date, the
operating status (Warm-Up, Time Locked, Coasting, Recovering, or Manual),
which satellites are being tracked, and the Time Figure of Merit (TFOM) of the
output timing signals. Through this screen the user can:
•
Enable or Disable time transfer from the GPS receiver to the master clock. If
time transfer is disabled (Manual mode) the user can also set the time and
date.
•
Screen 2 - Time Mode, Local Offset, Internal Offset
- Displays the active time
reference, local time zone hours offset, and internal timing offset. Through this
screen the user can:
•
Select the time reference of the output time (UTC, Local UTC, GPS, or Local
GPS).
•
Specify the local time offset from UTC.
•
Specify the antenna system delay compensation or internal offset.
•
Screen 3 - Time Code Selection
- Displays the selected format of the time code
output. Through this screen the user can:
•
Select the format of the time code output signal (IRIG A, IRIG B, or IRIG G).
•
Screen 4 - Daylight Saving Time Status
- Displays whether the Manual
Daylight Saving Time function is enabled or disabled, an hour is to be added or
subtracted, and the day of the current month of which an hour is to be added or
subtracted to the local time. Through this screen the user can:
•
Enable or Disable the Daylight Saving function.
•
Specify whether an hour is to be added or subtracted at 02:00 hours local
time of the selected day of the current month.
•
Specify the day of the current month on which Daylight Saving Time is to
occur.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
