1. General Information
1-1. Features
General Features
▌Easy settings by using encoders.
▌Output Voltage/Current Breaking and Restoration of Function (Output ON/OFF)
▌Front Panel Key Lock Function
▌Alarms for Various Events
▌Excellent Precision and High Resolution
▌Built-in Remote Sensing for Load Voltage (V-Sensing)
▌Over Voltage Protection (O.V.P.) / Over Current Protection (O.C.P.) / Over Temperature Protection (O.T.P.) Trip /
Fan RPM Trip / Power Module Trip / Voltage-Current Trip / V-Sensing Error / AC Input Trip / Pfc Ca
▌Under Voltage Limit (U.V.L.)/Over Voltage Limit (O.V.L.), Under Current Limit (U.C.L.)/Over Current Limit (O.C.L.)
▌Excellent Load Regulation and Line Regulation
▌Storing and Recalling up to 10 Operating Settings (Voltage, Current, OVP, OCP)
▌Save and Confirm up to 10 Error Messages
▌Highly Efficient Output of 80%~90%
Remote Interface
▌Supports Various Interfaces such as RS232C, RS485, and TCP/IP
▌Compatible with SCPI (Standard Commands for Programmable Instruments)
▌High-Speed Setting & Measurement
▌Many Built-In Commands
▌Easy Interface Settings by Using the Front Control Panel's I/O config
▌Technical Realization of Products Insulation & Floating Logic
▌Built-In Error Checking Function for SCPI Programming Grammar
Calibration
▌Software Calibration by manual with PC (no need to open cover of instrument for calibration)
▌Easy calibration by using independent or PC interface
Factory Functions
▌Initialization Function of 10 User Memories
▌Save and Recall Last State of the Instrument Before Turning Off
▌“Auto Key Lock & Auto Cursor Move” Function to Prevent Operator Mistakes
▌OVP & OCP Disable Settings Available
▌Fast or Precise Value Reading by Using “Adc” (Analog to Digital Conversion)
▌Calibration Recall Function
▌Calibration Back-up Function
Self-Testing
▌Front Panel Test
▌ADC H/W Error Test
▌Remote Interface Test
▌Unregulated State Test
▌Memory Data Verification Test
▌ADC/DAC Calibration Verification Test
- 6 -
MX Series Single Output products are high-performance, high-efficiency programmable DC power
supply with 5KW~15KW capacity. It supports RS-232C and RS-485 interfaces based on SCPI (Standard
Commands for Programmable Instruments) or Modbus protocols. Refer to the Modbus Manual when
using the Modbus protocol.
Level Settings
Summary of Contents for MX Series
Page 61: ...57...