ODA MX Series, User Manual, Page: 44 / 92

▌Use the cursor key to select “
2.dhcp
” and press the IO/Local key.
The TCP/IP Port settings must be identical to the PC.
Displayed LCD Message >port 5000 This can be different depending
on the previous state.
▌Set the port by using the cursor key and encoder switch.
▌Press the IO/Local Key after completing the settings.
▌The "
wait..." message will be displayed.
Displayed LCD Message
wait...
▌Standby while the unit is receiving an IP from the server.
After normally receiving an IP, the unit will display the received IP and exit the menu.
Displayed LCD Message Local ip is 192.168.123.32
▌If an IP is not received within a certain time, the unit will display the “Time Out Error”
message and exit the menu.
*Viewing IP
▌Turn on the power switch.
After turning on power, check if the unit is in "**OUTPUT OFF**" mode.
▌Press the IO/Local Key for the TCP/IP settings.
Displayed LCD Message
I/O> 1.RS232C
This can be different depending
on the previous state.
▌Depending on the previous settings, TCP/IP, RS232C, RS485, or USB
is displayed while the unit is booting up. If "4.tcp/ip" is not displayed, press the cur
key to set "I/O> 4.tcp/ip" displayed on the LCD.
Displayed LCD Message
I/O> 4.tcp/ip
▌Press the IO/Local Key to view your IP.
Displayed LCD Message
>1. Static
This can be different depending
on the previous state.
▌Use the cursor key to show “
3.IP CHECK
.”
Displayed LCD Message >3. ip check
▌Pressing the IO/Local key shows the IP set for the unit. After a certain time, the unit
will exit the menu. Otherwise, you can press the IO/Local key to exit the menu manua
Displayed LCD Message
>192.168.123.32
Standard UTP (LAN) cables have been used.
Note
- 41 -