ODA MX Series, User Manual, Page: 6 / 92

3-3. Remote Voltage Sensing
24
CV Regulation
Output Rating
Output Noise
Stability
Remote Voltage Sensing Connection
3-4. Programming Over Voltage Protection(OVP)
----------------------- 26
3-5. Programming Over Current Protection(OCP)
---------------------- 29
3-6. Programming Under Voltage Limit(UVL)
31
3-7. Programming Over Voltage Limit(OVL)
32
3-8. Programming Under Current Limit(UCL)
33
3-9. Programming Over Current Limit(OCL)
34
35
36
RS232C Setting
RS232C Configuration
RS485 Setting
RS232C,RS485 Connection Drawing
TCP/IP Setting(Option)
Delimiter
Response
45
3-13. Store
46
3-14. Recall
47
3-15. Output ON/OFF
48
3-16. Error Message Display
49
4. CALIBRATION
50
4-1. Characteristics
50
4-2. Preparation for Calibration
50
4-3. Equipments required for Calibration
51
4-4. Technic of Calibration
51
Instruments Connection Drawing
Electronic Load
Current-Monitoring Resistor(shunt)
DVM(Digital Volt Meter)
Programming
Measuring Point
3-11. IO/Local
---------------------------------------------------------
3-12. Limit Display
---------------------------------------------------------
---------------------------------------------------------
3-10. Key Lock
-----------------------------------------------------
- 3 -
-----------------------------------------------------
----------------------
----------------------
----------------------
------------------------------------------------------------------
---------------------------------------------------------
----------------------
-----------------------------------------------------------
--------------------------------------------------------