3-15. Output ON/OFF
This feature turns the power source from the output terminal on and off.
It allows you to shut down power from the DUT without removing it.
The procedure for activating this is shown below.
▌Turn on the power switch.
After turning on power, check if the unit is in "**OUTPUT OFF**" mode.
▌This is the default Output OFF state. To approve output, press the OUTPUT
ON/OFF key once.
▌To turn off the output again, press the OUTPUT ON/OFF key once more.
≫ Related remote interface commands
OUTP {OFF|ON}
OUTP?
Application How to check the output state and turning it on if it is off
OUTP? Return value "0"
Check Output State
OUTP ON
Approve Output
If the unit is not in Output OFF mode when it is first turned on, disabling the last state in Factory mode m
the power supply always shift to default initialization mode, enabling use of Output OFF mode at all times
The Last State mode is a feature that lets you save the last set state to recall the settings when you
turn on the unit again.
Note
- 46 -
Summary of Contents for MX Series
Page 61: ...57...