ODA MX Series, User Manual, Page: 62 / 92

5-3. USER-MEM CLEAR
▌This mode is to initialize the 10 datas of OVP, OCP, UVL and etc in the non-volatile memory at once.
▌After initialized the datas of non-volatile, initialized data never be recovered.
▌Initialized contents
>Voltage 0V
>Current Limit maximum value
>OVP-Level OVP setting maximum value
>OCP-Level OCP setting maximum value
>UVL-Level 0V
>OVL-Level Limit maximum value
>UCL-Level 0A
>OCL-Level Limit maximum value
>Output Mode OFF
USER-MEM CLEAR Operating
▌Power switch on in a pressing "FACTORY" key
▌Power switch ON
▌When appearing "1. user-mem clear" message, release "FACTORY" key.
▌In order to initialize non-volatile memory datas, press the "FACTORY" key one
more time
LCD Display done
≫ Related Remote Interface Command
FACT:USER-CLE
Apply: Initialize non-volatile memory data
Release
Press hold
- 58 -
FACT:USER-CLE