5-8. OCP USE
▌Enable or disable the "Over Current Protection" function.
▌In case of a like inductivity DUT, motor, big capacity DUT and etc, occurs "OCP trip" frequently
so if it is not convenient to use the power supply, you can set disable of "OCP USE" mode.
▌If disable the "OCP USE", the power supply doesn't cut the DC source when current level is
over OCP setting level.
▌Function
> DISABLE
Disable "OCP USE" mode.
> ENABLE
enable "OCP USE" mode.
OCP USE Operating
▌Power switch on in a pressing "FACTORY" key
▌Power switch ON
▌When appearing "1. user-mem clear" message, release "FACTORY" key.
▌Enter to "6. OCP USE" mode by using cursor key.
▌In order to set, press the "FACTORY" key one more time.
LCD Display
▌Set the "enable" mode by using cursor key.
LCD Display
▌To finish the "OCP USE" mode, press the "FACTORY" key one more time.
LCD Display
≫ Related Remote Interface Command
FACT:OCP {DIS|ENA}
FACT:OCP?
Return Value(1, 0)
Apply: FACT:OCP?
Return value : 0
"OCP USE" mode is disable state
FACT:OCP ENA
"OCP USE" mode is changed to
enable state
Release
enable
disable
Press hold
done
- 63 -
Summary of Contents for MX Series
Page 61: ...57...