ODA MX Series, User Manual, Page: 63 / 92

5-4. LAST STATE
▌When you turn on the power supply, you can select the default state or last state of power off.
▌Function
> DISABLE When selected this mode, boot the power supply to original default value
For the safety, recommend this mode.
> SAFETY Recall last state before you turn off but boot the default state of ouput to Output OFF
T
herefore, the setting value is restored but it is safe as it boots with Output OFF.
> FULLY Recall last state before you turn off fully.
Since the output state is also restored, voltage/current can be output.
In this case, caution is required because it is dangerous.
LAST STATE 실행
▌Power switch on in a pressing "FACTORY" key.
▌Power switch ON
▌When appearing "1. user-mem clear" message, release "FACTORY" key
▌Enter to "2. last state" mode by using cursor key.
▌In order to set, press the "FACTORY" key one more time.
LCD Display
disable
▌Set the "SAEFTY" mode by using cursor key.
LCD Display
safety
▌
To finish the last state mode, press the "FACTORY" key one more time.
LCD Display done
≫ Related Remote Interface Command
FACT:LAST-STA {DIS|SAF|FUL}
FACT:LAST-STA?
Return Value(DISABLE, SAFETY, FULLY)
Apply: FACT:LAST-STA? Return value : FULLY Last state mode is "FULLY"
FACT:LAST-STA DIS Last state mode bacame to "DISABLE" mode
- 59 -
Press hold
Release