8-1
6000 Series user’s manual
Analog I/O
Chapter 8:
Analog I/O
Note
Analog I/O is only available on the 6040 PC Microcontroller.
≡
Description
The 6040 has eight input channels and two analog output channels, all
with 12 bits of resolution. It can read and write data at 100,000
samples per second.
The range of each input channel is independently software selectable for
±10V, ±5V, 0 to 10V, or 0 to 5V. An adjustment potentiometer is pro-
vided to adjust the selected input voltage range by +5%. The input
multiplexer is fault protected to ±16.5V. The input resistance is 10M
Ω
.
The output ranges are individually jumperable for ±5V, 0 to 10V, or 0 to
5V. Both the analog input and analog output lines are located at J7.
WARNING!
The analog output channels come up in an undefined state
until they are configured in your software. Critical systems
should be disabled until the analog output channels are
initialized to a known state.
Summary of Contents for 6000 Series
