Octagon 6000 Series, User Manual

Page: 145 / 233

18-6
CPU power management 6000 Series user’s manual
suspend delay=xx Sets delay time before system SUSPENDs
(xx=0-31 minutes)
hdd delay=xx Sets delay time before hard drive suspends,
xx=0-31 minutes
IDLE timer resets
The IDLE timer monitors system activity to prevent the system from
entering SUSPEND mode if bus activity indicates that the system is
busy. Access to these devices will also cause the system to RESUME
from SUSPEND mode. The bus activities that are monitored are config-
ured in a .PMI file:
keyboard reset idle=Y|N Enables reset of IDLE timer if Keyboard
access occurs
video reset idle=Y|N Enables reset of IDLE timer if Video
access occurs
HDD reset idle=Y|N Enables reset of IDLE timer if Hard Disk
Drive access occurs
IRQ reset idle=Y|N Enables reset of IDLE timer if IRQ access
occurs
LPT reset idle=Y|N Enables reset of IDLE timer if LPT access
occurs
COM reset idle=Y|N Enables reset of IDLE timer if COM access
occurs
FDD reset idle=Y|N Enables reset of IDLE timer if Floppy Disk
Drive access occurs
DRQ reset idle=Y|N Enables reset of IDLE timer if DRQ access
occurs
Interrupts in the system can also reset the IDLE timer to prevent entry
into reduced power modes. These interrupts should be enabled to reset
the IDLE timer if they indicate that the system is active. The inter-
rupts to reset the IDLE timer are configured in a .PMI file:
irq0 reset idle=Y|N Enables reset of IDLE clock if IRQ0 occurs
irq1 reset idle=Y|N Enables reset of IDLE clock if IRQ1 occurs
irqnmi reset idle=Y|N Enables reset of IDLE clock if IRQNMI occurs
irq3 reset idle=Y|N Enables reset of IDLE clock if IRQ3 occurs
irq4 reset idle=Y|N Enables reset of IDLE clock if IRQ4 occurs
irq5 reset idle=Y|N Enables reset of IDLE clock if IRQ5 occurs
irq6 reset idle=Y|N Enables reset of IDLE clock if IRQ6 occurs
irq7 reset idle=Y|N Enables reset of IDLE clock if IRQ7 occurs
irq8 reset idle=Y|N Enables reset of IDLE clock if IRQ8 occurs
irq9 reset idle=Y|N Enables reset of IDLE clock if IRQ9 occurs
irq10 reset idle=Y|N Enables reset of IDLE clock if IRQ10 occurs
irq11 reset idle=Y|N Enables reset of IDLE clock if IRQ11 occurs
irq12 reset idle=Y|N Enables reset of IDLE clock if IRQ12 occurs
irq13 reset idle=Y|N Enables reset of IDLE clock if IRQ13 occurs
irq14 reset idle=Y|N Enables reset of IDLE clock if IRQ14 occurs
irq15 reset idle=Y|N Enables reset of IDLE clock if IRQ15 occurs