Octagon 6000 Series, User Manual

Page: 29 / 233

2-12
Quick start 6000 Series user’s manual
1. Connect the equipment as per the following diagram:
Figure 2-8 Downloading files using TRANSFER.EXE
Null modem
adapter
COM port
Desktop PC
PC SmartLINK
VTC-9F
cable
COM1
TRANSFER.EXE
PC Microcontroller
2. On the desktop PC, log into the directory which contains the file(s) you
will download to the PC Microcontroller, for example:
C:\MPC\60xx\DEMO
3. Start PC SmartLINK and power on the PC Microcontroller.
4. Execute the TRANSFER.EXE program from the PC Microcontroller by
entering:
60xx C:\> TRANSFER E:DEMO.EXE
Note In this case, E: is the virtual drive assigned in CONFIG.SYS. Any PC
Microcontroller read/write drive could be substituted.
Note When sending a file, enter the following:
60xx C:\> TRANSFER /S
The following message is displayed from the PC Microcontroller:
Receiving E:DEMO.EXE . . .
5. Execute the following steps using PC SmartLINK:
a. Press <ALT><D> to enter the download screen.
b. Type in the name of the file to transfer, e.g. DEMO.EXE (if PC
SmartLINK was not started in the DEMO directory as instructed in
Step 2, then the entire path may have to be entered
C:\MPC\DEMO\DEMO.EXE)