Octagon 6000 Series, User Manual

Page: 43 / 233

3-6
Setup programs 6000 Series user’s manual
Press ENTER to SAVE the changes or
Press ESC to EXIT without saving the changes.
Saving options.
Options saved.
Depending on the options you have selected, the system may display the
following message:
You must reset for these options to take effect.
If you entered SETUP with the hotkeys (i.e., “backspace” and “S” keys),
the system will reboot automatically.
SETUP example
The following example configures a system with no memory test, 9600
baud, and booting from C:
OCTAGON SYSTEMS CORPORATION
60xx SETUP UTILITY Vx.x
(c) Phoenix Technologies, Ltd. 1985, 1995
_____________________________________________________________
(Press SPACE to CHANGE, ENTER to ACCEPT, ESC to EXIT)
Serial Console on COM1: ENABLED
COM1 Console Baud Rate: 9600
Power on memory test: DISABLED
Boot Sequence: C: ONLY
Parallel (LPT) Port: ENABLED
Parallel Port Mode: Bidirectional Printer Port
Number of floppy drives: 1
Floppy drive 1 size 3.5", 1.44 MB
Number of hard drives 1
Auto Drive Configuration: ENABLED
SETUP Entry via Hotkey: ENABLED
Power Management: DISABLED
Shadow Video BIOS Area: DISABLED
Shadow C8000h-CFFFFh: DISABLED
Shadow D0000h-D7FFFh: DISABLED
Shadow D8000h-DFFFFh: DISABLED
Press ENTER to SAVE the changes or
Press ESC to EXIT without saving the changes.
Options Saved.
You must reset for these options to take effect.
60xx C:\>
Note Executing SETUP /D will change all setup parameters to default values.
Note Power management should be disabled when using CAMBASIC.