Oce plotwave 345 Operation Manual Download Page 49

Page: 49 / 300

The scanner states

State

Icon

Description

[User intervention re-
quired]

General error message.

[Scanner is busy]

The scanner is active.

[Scanner is ready]

The scanner is ready to start a scan job.

The toner states

Icon

Description

Toner OK

Toner low, or empty.

The Remote Service States

Icon

Description

no icon

[ Remote Service ] is either disabled or enabled and connected to Océ.

[ Remote Service ] is enabled, but could not connect to Océ.

Remote assistance to the system is enabled and currently accepting a connection.

The E-shredding states

Icon

Description

no icon

E-shredding is disabled.

E-shredding is enabled or busy.
A tooltip is available with extra information.

The system monitor

Chapter 3 - Define your Workflow with Océ Express WebTools

Summary of Contents for plotwave 345













































































































































































































































































































Search results

Summary of Contents for plotwave 345

Reviews:

Related manuals for plotwave 345

Brands by name

Popular brands

Oce plotwave 345, Operation Manual

Search results

Summary of Contents for plotwave 345

Reviews:

Related manuals for plotwave 345

Brands by name

Popular brands