Oce plotwave 345 Operation Manual Download Page 28

Page: 28 / 300

The components of the scanner (top cover opened)

Component

Description/Function

[originals exit]

Exits originals for reception into the front origi-
nal tray.

[original size ruler]

Use this ruler to measure the original.

[original feed rollers]

A set of rollers used to transport the original.

[top cover]

Closes off the scanner.

[open levers]

Use the open levers to open the top cover of the
scanner.

[original support rollers]

A set of rollers to guide the original.

[scanner top cover rollers]

A set of rollers in the top cover to guide the orig-
inal.

[original sensors]

Sensors to detect the original.

[transparent contact plates]

Cover of the image sensors.

[original feeding table]

Use the original feeding table to feed the original
into the scanner (face up).

The components of the scanner (optional)

Chapter 2 - Get to Know the Printing System

Summary of Contents for plotwave 345













































































































































































































































































































Search results

Summary of Contents for plotwave 345

Reviews:

Related manuals for plotwave 345

Brands by name

Popular brands

Oce plotwave 345, Operation Manual

Search results

Summary of Contents for plotwave 345

Reviews:

Related manuals for plotwave 345

Brands by name

Popular brands