manualshive.com logo in svg

Oce ColorWave 500, Operation Manual

Share
Download
Oce ColorWave 500 Operation Manual Download Page 36

[Receiving rack (basket)]

Illustration

The [Receiving rack (basket)] is hooked at the
rear side of the printer. It can collect 2 - 5
prints. The [Receiving rack (basket)] bends
the printed output. Not all media types are
appropriate for this finishing option.

NOTE

The [Receiving rack (basket)] is not
supported in combination with the
folding device, Océ Delivery Tray
or take-up module.

Folding device

Illustration

The folding device is an automatic folding
device that folds large sized plots.

NOTE

• The folding device is not sup-

ported in combination with the
[Receiving rack (basket)], Océ
Delivery Tray or take-up mod-
ule.

Océ Delivery Tray

Illustration

The Océ Delivery Tray is a flat tray behind
the printer. The delivery tray can collect a
maximum of 150 prints.

NOTE

The Océ Delivery Tray is not sup-
ported in combination with the
[Receiving rack (basket)], folding
device or take-up module.

The delivery destination

36

Chapter 2 - Get to Know the Printing System

Summary of Contents for ColorWave 500











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands