manualshive.com logo in svg

Oce ColorWave 500, Operation Manual

Share
Download
Oce ColorWave 500 Operation Manual Download Page 24

Move the system 

Introduction

You can move the printer to a new location.

Before you begin

IMPORTANT

• When the printer is connected, you must first switch off and disconnect the printer (see 

Switch

the printing system off on page 22

 and 

Disconnect the network cable and the mains supply

cable on page 303

).

• Close the media drawers.

NOTE

Be aware of the size of the printer working area (see 

Printer working area (Footprint) on

page 19

).

Procedure

1.

Pull with both hands to remove the left side cover.

2.

Pull at the left foot cover to remove it.

Move the system

24

Chapter 2 - Get to Know the Printing System

Summary of Contents for ColorWave 500











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands