manualshive.com logo in svg

Oce ColorWave 500, Operation Manual

Share
Download
Oce ColorWave 500 Operation Manual Download Page 132

Package size

[Package size]

Description

Example

[Width]

Defines the fold distance of the Z-
fold.

NOTE

Note that the package
width size excludes the
[Binding edge size]. So the
back panel consists of the
package width size plus the
binding edge size (A+B).

180 - 230 mm

7.1 - 9 inch

[Height]

Defines the fold distance of the cross
fold.
This only applies to the folding de-
vice in [Full fold] mode.

 279 mm / 11 inch

or

305 mm / 12 inch

Delivery

NOTE

Note that the [Fold delivery] value depends on the chosen [Folding package] value.

[Fold delivery]

Description

[Belts]

Defines that the output will be delivered on the belt unit (only for
[Full fold] and when the belt unit is installed).

[First fold output]

Defines that the output will be delivered at the first fold section
(only for [First fold only]).

Fold settings

132

Chapter 3 - Define your Workflow with Océ Express WebTools

Summary of Contents for ColorWave 500











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands