manualshive.com logo in svg

Oce ColorWave 500, Operation Manual

Share
Download
Oce ColorWave 500 Operation Manual Download Page 152

Rendering intent: Absolute colorimetric

Absolute colorimetric is similar to relative colorimetric, but uses a different method to handle
the white point.
Absolute and relative colorimetric both keep gamut colors and clip those out of gamut, but ab-
solute colorimetric also keeps the white point.
Absolute colorimetric is advised for "proofing" applications, that require a good color match,
but also emulation of paper white. As a result of that, white areas can become yellowish, be-
cause the printer tries to emulate the whitepoint of the input profile.
This setting provides the highest accuracy in rendering RGB colors into CMYK colors, including
rendering the source's white.

NOTE

You can see the minor level of blue of the monitor background as a bluish white in
the lightest tones of the printed output. A minor yellow tone can occur in the white
tones of a PDF/TIFF original or an HP-GL type document.

Rendering intent: Absolute colorimetric

152

Chapter 3 - Define your Workflow with Océ Express WebTools

Summary of Contents for ColorWave 500











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands