Oce ColorWave 500, Operation Manual

Page: 141 / 330

Set the Océ Print Assistant Behavior
Introduction
This setting is only used when the [Print quality] is set to [Océ Print Assistant].
The [Océ Print Assistant] decides what print setting must be used, based on the average toner
coverage of the print.
By analyzing the image the Océ Print Assistant can automatically determine the best print setting
to be used for each document. The [Océ Print Assistant behavior] setting allows you to tune the
outcome of the Océ Print Assistant's analysis to fit your specific needs. The thresholds for
switching from one mode to another can be altered by the [Océ Print Assistant behavior]¹. In this
way the [Océ Print Assistant] can fine-tune the to optimize further speed and quality to his
personal needs. The [Océ Print Assistant] will be the default mode for the Océ ColorWave 500 .
¹ The number in the [Océ Print Assistant behavior] represents a position on a scale from 0 to 100.
A higher number means an increased preference for print quality, a lower number means an
increased preference for print speed.
Procedure
1. Click [Preferences] - [System defaults].
2. Click [Edit] in the [Printer properties] bar or click on the [Océ Print Assistant behavior] setting.
3.
Set the slider to '0' if the print productivity is the most important factor.
Set the slider to '100' if the print quality is the most important factor.
4.
Click [Ok] to confirm your entries or [Cancel] to reject your entries.
Set the Océ Print Assistant Behavior
Chapter 3 - Define your Workflow with Océ Express WebTools 141