manualshive.com logo in svg

Oce ColorWave 500, Operation Manual

Share
Download
Oce ColorWave 500 Operation Manual Download Page 272

Refill the Toner

Replace the toner cartridge 

Introduction

With the closed off toner cartridges, you can easily refill toner.

When to do

When a ‘Toner Low’ message appears on the user panel, you need to refill the toner. The
message will be displayed until you refill the toner. Under normal conditions the printer can
finish the current job, before it stops printing.

Before you begin

• You cannot add toner while printing. Wait till the printer stops printing or abort the job.
• You can leave the printer turned on when you refill the toner.
• Make sure you use toner suitable for the Océ ColorWave 500.

Procedure

1.

Unpack the toner cartridge.

NOTE

Do not throw away the packaging of the new toner cartridge. The packaging is used as
maintenance tray.

2.

Remove the red transport clip from the toner cassette.

Refill the Toner

272

Chapter 5 - Maintain the Printing System

Summary of Contents for ColorWave 500











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands