Oce 31x5E Maintenance Manual Download Page 39

Page: 39 / 178

Set the defaults

Enable the copy control device

Introduction

The copy control device is connected externally to the machine. The system
gives access to external users who are not authorized in the accounts database.
The external user must insert coins or a credit card to gain access to the
machine.

Océ Service must install and configure the Copy control device.

You can enable or disable an installed and configured copy control device.

An enabled copy control device and an access-secured system can be
combined to enable use by internal and external user groups (see ‘

About the

access-secured system

’ on page

[20] Entry screen for external users

[21] Entry screen for external and internal users

The following table displays the requirements for the external users when the
copy control device is enabled:

Summary of Contents for 31x5E



















































































































































































Search results

Summary of Contents for 31x5E

Reviews:

Related manuals for 31x5E

Brands by name

Popular brands

Oce 31x5E, Maintenance Manual

Search results

Summary of Contents for 31x5E

Reviews:

Related manuals for 31x5E

Brands by name

Popular brands